Scissor-type aerial work platform: It is a special equipment for aerial work with a wide range of uses. Its scissor mechanical structure makes the lifting platform highly stable. The wide working platform and high load-bearing capacity make the high-altitude working range larger and suitable for multiple people to work at the same time.

 

 

For non-standard customization, please provide parameters such as load capacity, lifting height, table size, etc.

 

 

Features:

 

1: Stable structure, large carrying capacity, stable lifting and simple maintenance.

 

2. It has strong adaptability and can be used in harsh environments and general explosion-proof places.

 

Three: Widely applicable, suitable for customers with high-altitude working needs in factory workshops, squares, lobbies, airports, parks, etc.

 

Four: High safety, using upper and lower dual-control safety low-voltage operation buttons, equipped with one-button emergency stop and emergency descent device for accidental loss of power, which improves the safety of the equipment.

 

Five: Equipped with auxiliary walking device, the work surface can be extended outwards.

 

Six: The driving speed is fast, up to 80km/h.

 

Instructions:

 

1. Before use, support the four legs of the platform firmly and horizontally.

 

2. Turn on the power and operate the lifting button on the electric control box, and the platform can be raised and lowered.

 

3. Operate the up button and the platform will rise (the motor will rotate in the reverse direction when the platform does not rise. As long as the wiring sequence of the power cord is changed, the motor will rotate forward.); operate the down button and the platform will descend.

 

4. The platform is equipped with remote control buttons, which can be operated up and down while standing on the table.

 

5. The platform is equipped with an emergency lowering valve, which is used for emergency lowering operations during power outages. Loosen the lowering handle counterclockwise by hand, and the platform can descend slowly. After tightening it clockwise, the platform will stop descending.